The Cisco CCENT CCNA Training Courses Online for Certification with Virtual Labs
Cisco Certified Network Associate CCNA Training Course will validate your ability to install, configure, operate, and troubleshoot
medium-size route and switched networks, including implementation and verification of connections to remote sites in a WAN.
CCNA curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and
performance-based skills. This new curriculum also includes (but is not limited to) the use of these protocols: IP, Enhanced
Interior Gateway Routing Protocol (EIGRP), Serial Line Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs).
Cisco Authorized CCENT CCNA with Voice and Security Certification Training Courses Includes
 Cisco Instructor led training
24 x 7 unlimited Access
Online Training Library of Cisco Books
 - Virtual labs (vLabs) enable users to go beyond a static demonstration or simulation, to experiment and
make mistakes working with live Cisco Routers and Switch equipment.
Test Preps - Hundreds of Practice Exams Online
 Online Mentoring 24 x 7 to Instructors to Answer any Questions
Covers both the CCENT and CCNA with
Free Bonus CCNA Voice and CCNA Security A $400.00 Value
|
CCENT and CCNA Course Online One year Access
|
elccnaon
|
$795.00
|
|
Courses Included
- Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 (Revised) New!
- Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 (Revised) New!
Bonus Courses for CCNA Security and Voice
- Implementing Cisco IOS Network Security (IINS) v1.0 New!
- Implementing Cisco IOS Unified Communications (IIUC) v1.0 New!
- Implementing Cisco Unified Wireless Networking Essentials (IUWNE) v1.0 New!
VLabs Included
Training Time - Each lab is 1 to 4 hours
- CALCULATING SUBNET MASKS New!
- CLASSIFYING NETWORK ADDRESSING New!
- COMPUTING USABLE SUBNETS AND HOSTS New!
- CONFIGURING A CISCO ROUTER AS A DHCP SERVER New!
- CONFIGURING EXPANDED SWITCHED NETWORKS: RSTP and Troubleshooting New!
- CONFIGURING EXPANDED SWITCHED NETWORKS: VLANs and VTP New!
- CONFIGURING NAT AND PAT New!
- CONFIRMING THE RECONFIGURATION OF THE MAIN OFFICE NETWORK New!
- CONNECTING TO THE INTERNET AND MAIN OFFICE: Static and Dynamic Routes New!
- CONVERTING DECIMAL TO BINARY AND BINARY TO DECIMAL New!
- ENHANCING THE SECURITY OF INITIAL ROUTER CONFIGURATION New!
- ENHANCING THE SECURITY OF INITIAL SWITCH CONFIGURATION: SSH & Port Security New!
- ESTABLISHING AND TROUBLESHOOTING A FRAME RELAY WAN New!
- IMPLEMENTING A SMALL NETWORK: Routers New!
- IMPLEMENTING A SMALL NETWORK: Switches and Connectivity New!
- IMPLEMENTING AND TROUBLESHOOTING ACLs New!
- IMPLEMENTING AND TROUBLESHOOTING EIGRP New!
- IMPLEMENTING AND TROUBLESHOOTING OSPF New!
- IMPLEMENTING IPv6: Addressing, Routing, and Dual Stacking New!
- MANAGING REMOTE ACCESS SESSIONS New!
- OPERATING AND CONFIGURING A CISCO IOS DEVICE: Context-Sensitive Help New!
- PERFORMING INITIAL ROUTER STARTUP New!
- PERFORMING SWITCH STARTUP AND INITIAL CONFIGURATION New!
- USING CISCO DISCOVERY PROTOCOL AND MANAGING CISCO DEVICES New!
- USING WINDOWS APPLICATIONS AS NETWORK TOOLS New!
- Completing an ISDN BRI Call and Configuring DDR (retired)
- Completing an ISDN call
- Configuring Extended IP Access Lists.
- Configuring RIP, IGRP, EIGRP, and OSPF
- Configuring Serial Connections to WAN Service Providers
- Discovering network status using SHOW IOS Commands
- Exploring Split Horizon and Poison Updates in a RIP Network
- Implementing Frame Relay on Subinterfaces
- IP Subnetting Lab
- Scaling IP Addresses with Network Address Translation.
- Troubleshooting OSPF Networks in a Frame Relay Environment
- Troubleshooting Redistribution in EIGRP and OSPF
- Using CDP to Gather Information about Neighboring Devices
Exam Description
The 640-802 CCNA is the composite exam associated with the Cisco Certified Network Associate certification. Candidates can
prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 and the Interconnecting Cisco
Networking Devices Part 2 (ICND2) v1.0 courses. This exam tests a candidate's knowledge and skills required to install, operate,
and troubleshoot a small to medium size enterprise branch network. The topics include connecting to a WAN; implementing
network security; network types; network media; routing and switching fundamentals; the TCP/IP and OSI models; IP addressing;
WAN technologies; operating and configuring IOS devices; extending switched networks with VLANs; determining IP routes;
managing IP traffic with access lists; establishing point-to-point connections; and establishing Frame Relay connections.
Exam Description
The 640-822 Interconnecting Cisco Networking Devices Part 1 (ICND1) is the exam associated with the Cisco Certified Entry
Network Technician certification and a tangible first step in achieving the Cisco Certified Network Associate certification.
Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 course. This
exam tests a candidate's knowledge and skills required to successfully install, operate, and troubleshoot a small branch office
network. The exam includes topics on networking fundamentals; connecting to a WAN; basic security and wireless concepts;
routing and switching fundamentals; the TCP/IP and OSI models; IP addressing; WAN technologies; operating and configuring
IOS devices; configuring RIPv2, static and default routing; implementing NAT and DHCP; and configuring simple networks.
|
