Cisco Storage Training Online Courses for MPLS, SAN, Storage, BGP, IPv6, CASI, Optical AND VOICE Curriculum
 This special training bundle consists of over 103 Cisco course covering such areas as IPv6, Wireless, MPLS, MDS 9000, SAN, Voice, Cisco
Storage Devices,NAS and VPN.Courses. This selection of course are designed by Cisco ® and covers advance subject matter. Each Course
training time ranges from one hour to over ten (10) training hours. Each course is designed for knowledge base only.
Netwind Learning Center Cisco Advance Online training course for Storage, Voice, MDS 9000, CASI, SAN, VPN, MPLS and NAS consists of the following:
 Instructor Led Course
Cisco Authorized Courses
Virtual Labs vLabs - Real life Experience
100 hours of interactive training
Our Advanced Storage Training Consists of the following Cisco Courses:
Advanced Routing and Switching for Field Engineers/FE v2.0
32 Minutes
The ability to prevent network security attacks is essential to creating the most effective networks in any environment. The Cisco Security Essentials e-learning course is designed to
provide engineers with an introduction to strategies and tools to prevent network attacks and implement security policies. This course is intended primarily for systems engineers and field engineers.
Cisco Security Essentials/SE v1.0
48 Minutes
The ability to prevent network security attacks is
essential to creating the most effective networks in any environment. The Cisco Security Essentials e-learning course is designed to provide engineers with an introduction to
strategies and tools to prevent network attacks and implement security policies. This course is intended primarily for systems engineers and field engineers.
Cisco Unified Wireless Networking/ SE v4
32 Minutes
In this course, you will explain the components, functions, and features of thin client architecture and how to configure an Enterprise Wireless Solution.
Cisco Wireless LAN Fundamentals (CWLF) v2.0
Over Nine hours of Training
In this course, you will examine the fundamentals of cisco wireless LAN technology. You explore the concepts of standalone and controller-based access points and controllers. In
addition, you will explore network management solutions and security. After completing this course, you will be able to discuss configuration and management of both standalone and controller-based wireless networks.
Cisco Wireless Mesh Networking (CWMN) v2/SE
Two Hours 39 Minutes
In this course, you will design, install, and maintain a wireless mesh network both as an add-on to an existing wireless LAN and as a new installation.
Routing and Switching Solutions for System Engineers
Over seven hours of Training
In this course, you will explore detailed network designs, including Service-Oriented Network Architecture (SONA) and Intelligent Information Network (IIN). You will examine how to provide
customers a technical description of routing and switching solutions and describe advantages of selecting Cisco solutions.
Wireless LAN Solutions v1.0 !
Over 12 hour of training
In this course, you will examine security threats and options for mitigating specific threats to your wireless network. In addition, you will become familiar with management tools and
solutions that can be used to easily manage the networks. Knowledge of advanced wireless LANs is recommended before taking Security and Management Solutions.
Wireless Technology v1.0
Over 12 hours of training
In this course, you will examine the fundamentals of wireless technology. You will explore the fundamental concepts of radio transmission, and WLAN technologies and components, as
well as 802.11 operations. After completing this course, you will be able to discuss modulation and spreading techniques, and select equipment that complies with applicable regulations.
You will also have a basic understanding of the components that are necessary to design a wireless network. This course will also prepare you to design an advanced wireless solution.
Software Profile Report
One Hour of Training
This course focuses on the use of the IOS Software Profile Report as a planning information tool. You will examine how to use it for network planning with customers, and for collecting
information for migration and upgrade strategies. The course will also show you how the report can help you identify sales and customer satisfaction opportunities. Additionally, you will
receive direction on where to get the tools to generate the report and how to use them.
Migration Methodology
One Hour 20 Minutes
This course describes the stages, tasks, and tools used to perform cyclic, planned release migrations. The IOS migration methodology has proven very successful for large businesses,
such as Wal-Mart, and it can be modified to work for any size business. All phases, planning, design, execution, and maintenance are discussed and tool location URLs, and
documentation downloads are included. Not only is the methodology used to make current and future upgrades easier, but it also affords the Cisco SE a window into recurring sales opportunities.
Chassis Fundamentals and Cisco SONET Products
Training Time 6 hours 57 minutes
In this course, you will gain familiarity and expertise in the design of optical platforms and the real-world application to customer solutions. You will also cover the fundamentals of the
available Cisco SONET optical product families.
IS-IS Fundamentals
In this course, you will understand the structure and benefits of IS-IS technology. You will also
identify the issues surrounding the design, implementation, and troubleshooting phases of an IS-IS-based network, which will enable you to optimize network performance.This course is
intended for system and support engineers who are preparing to design, deploy, implement, and troubleshoot OSI or IP routing services.
Chassis Fundamentals and Cisco SDH Products
Training Time 6 hours 57 minutes
In this course, you will gain familiarity and expertise in the design of optical platforms and the real-world application to customer solutions. You will also review the fundamentals of the
available Cisco SDH optical product families.
IOS Essentials
2 hours 19 minutes
This course provides an overview of IOS strategy. Release processes are traced and release
types are defined. You will get an overview of the Cisco IOS customer satisfaction focus and find guidelines on presenting and positioning Cisco IOS versus the competition. Typical
customer misperceptions are presented with suggestions for combating fear, uncertainty and doubt (FUD) about implementing Cisco IOS.
Advanced Voice Security
13 hours 50 minutes
In this course, you will identify security considerations, as well as potential sources of risks. You will also identify Voice over IP technology vulnerabilities within the infrastructure and
design and evaluate the physical security of the phone, hosts, and network infrastructure, as well as network access control. Additionally, you will identify methods of securing the host,
design a successful host security implementation, and identify various sources of security information. You will use cryptography to design, manage, and implement cryptographic tools,
as well as use the methods and strategies of application layer cryptography that are available in voice networks to design and implement cryptography at the application layer. You will also
use CallManager features for access control, and control external access to the voice network from external networks.
IPv6 Security
4 hours 28 minutes
The use of IPv6 technology introduces a whole host of new security issues. The ability to mitigate IPv6 threats will enable you to design, deploy, and maintain a secure IPv6 network to
meet customer requirements.This course is designed for experienced field and support engineers who have to design and deploy IPv6 solutions using Cisco devices running Cisco
IOS software, and/or the PIX firewall appliance.
VPN Design Fundamentals v2.0
4 hours 23 minutes
You will describe various VPN technologies so that you can create a VPN solution based on a customer's requirements. You will identify the strengths and limitations of VPN, IPsec, and
IKE technologies so that you will be able to select appropriate products and protocols when building or implementing a VPN design solution.
BGP
Over 10 Hours of Training
Connecting, Scaling, and Improving Network Stability, Routes and Influencing Route Selection, Cisco SDH Products
Cisco CallManager Administration and Call Routing Applications
3 hours 20 minutes
To meet your customer's advanced call routing requirements, you must understand how to use and implement route filters, transformations and translations. If you know how these features
can meet your customer's needs, you will improve your chances for a successful design and a sale. Failure to demonstrate a thorough understanding of these features will undermine your
credibility with the customer and jeopardize the sale.
MPLS
10 Hours of Training
Covers Introduction to MPLS, Multiprotocol Label Switching (MPLS) Traffic Engineering, MPLS
VPN, MPLS VPN Design Guidelines, Interconnecting MPLS VPNs, Layer 2 MPLS VPNs, MPLS VPN Technology, Introduction to MPLS (Revised), Advanced MPLS VPN Technologies,
MPLS for IPv6, Advanced MPLS Traffic Engineering, MPLS Security Issues, MPLS Traffic Engineering and Managing MPLS Services.
Storage Network Solutions
Over 10 hours
Covers Design, Fibre Channel SAN Architecture, Tuning and Troubleshooting Storage Network Solutions, Network Attached Storage (NAS) Concepts, Storage Area Network (SAN) Concepts
, Practical Application of Storage Networking, Fibre Channel Concepts and Session Management, Storage Network Solutions, Evolution of Storage Solutions and Storage Network Management
MDS 9000 Configuration and Troubleshooting
5 Hours of Training
The MDS 9000 is a family of multilayered fabric switches that provide a reliable backbone to storage networking systems and can actually lower the total cost of ownership of a new or
existing storage area network (SAN) implementations. The need for multi-protocol SANs is growing at a rapid pace, and the MDS 9000 Family has the ability to allow organizations to
build highly available, scalable storage area networks with comprehensive security and management. This course will concentrate on the key components, features, and capabilities
of the MDS 9000 Family, as well as the details of installing and troubleshooting these systems.
SONET
7 hours 20 minutes
Covers SDH, Optical Test Tools, Chassis Fundamentals and Cisco SONET Products
VPN
5 hours 13 minutes
Covers Remote Access and Wireless VPN Design, Examining IDS, Site-to-Site VPN Design,
Network Infrastructure Security and VPN Design Fundamentals
IDS
3 hours 21 minutes
Cover Implementing Host IDS, Implementing Network IDS and Analyzing Incidents and
Designing IDS
|
